For my level I decided to create my own assets, this was because i wanted my own style for my assets instead of a mix match of premade assets on the unreal marketplace. Below are going to be images and short descriptions of what i did to create the assets.
Church
I made my church by making a simple cube and extruding it outwards and upwards, i then brough some faces back to make the long part of the church and also created the bell tower by doing the same thing, i also cut out 4 faces to let you see inside.
I then cut out a hole for damage to the church.
Finally I added some bricks around the walls.
Barrel
For the barrel I used a cylinder, and gave it two wider faces at the top and bottom.
I then moved some of the faces on the outside to create uneven wood planks.
Finally i gave it a dome at the top.
Bed
For the bed I just used used simple cubes which I made longer or shorter and arranged them to look like a bed.
Box
For the box i did a similar thing like the barrel, i indented the side and top faces down a little bit, then i moved some of the faces around to create an uneven plank.
Canon
For the canon i used a mirrored cube and i extruded them to the left to create the tracks for the canon. I then moved the faces at the top together and then moved both up to create the barrel of the canon. I then cut out the inside and added some detail to it.
Chair
For the chair i just used 4 simple cubes, brought them upwards, joined the top of them together and then made a loop cut towards the back and made the back of the chair.
Table
For the table I did a similar thing to the chair where i pulled the 4 legs upwards and then joined the top and extruded that a little bit.
Lamp
For the lamp I used a cube, extruded the faces up and out a little bit and created the top of the lamp, I then cut out the middle faces to create an inside to the lamp.
Shell
For the shell i used a cylinder, extruded it upwards, then made the bottom faces wider to make the bottom and then the top part of the model come together like a cone.
Sign
Finally for the sign i made a cube, flattened it and cut out some faces at the bottom, i then made a square at the top where stuff is going to be kept.
